|
| |
Product
Name |
CHAIN
RAIL AND MESH BELT COMBINATION SMD HOT AIR REFLOW OVEN |
| |
Product
No. |
WJ-35RHA |
|
Features:
- Equipped PCB jam alarming device to give photoelectric sensor
alarm
- Equipped extreme and low temperature alarm signals and emergency
shut down device to ensure the safety
- Equipped Pneumatic auto cover opening device to clean residues
and be able to check the conveying systems.
- As the system was shut down, cooling system device will keep
detecting the temperature of the machine until the temperate was
cooled down to protect the system from damaged by high temperature.
- Special reinforced rail in segmented design that leaves adequate
gap/clearance between sections of rail and that holds adequate rail
straightness even under high temperature, the parallel degree maintains
within 1.0mm.
- Enhanced power saving function: Energy-preserver could save energy
and power consumption, it takes only one third boost power in reflow
operation.
- Independent circuit space in each zone and by means of specific
turbulent heat-collecting plate, compulsory stabilized hot air convection
is achieved between each compartment inside the machine the temperature
is dirstrbuted to each zone uniformly to eliminate shade and sheltering
effect and overcome the annoyance of uneven heating.
|
|
|
| |
Product
Name |
SMD
MESH BELT TYPE(COMPACT) |
| |
Product
No. |
WJ-35EHA |
| |
Features: |
|
| |
The
device is designed to small amount and variety of procreation,
and limited working space. Lessening design of whole machine
is depended on standard mode to narrow. |
|
|
|
| |
Product
Name |
SMD
MESH BELT TYPE(ECONOMICAL) |
| |
Product
No. |
WJ-40MHA |
|
Features:
- Hot air speed control adapted to a 32-bit digital speed controllers
of extra-low noise level that allows free shiftless speed adjustment.
- PID temperature controller could detect temperature deviation
automatically and keep the temerature in various zones within ±
1℃.
- Mesh-belt conveyor system made of SUS heat-resistant stainless
steel, and mesh-belt tensioning device adapted a lateral lead screw
adjust system for high performance.
- MHA series adapted hot air suction circulation design that imposes
hot air to flow reciprocally inside of furnace by supplying hot
air at a fixed speed or RPM that could overcomes the flaw resulted
from uneven heating.
- UPS safety device ensures all PCB discharged from the furnace
automatically upon any power disconnection, failure or pause causing
PCB to remain inside of the furnace.
|
|
|
| |
Product
Name |
SMD MESH BELT TYPE |
| |
Product
No. |
WJ-40BHA/BHB |
|
Features:
- Hot air speed control adapted to a 32-bit digital speed controllers
of extra-low noise level that allows free shiftless speed adjustment.
- PID temperature controller could detect temperature deviation
automatically and keep the temerature in various zones within ±
1℃.
- Mesh-belt conveyor system made of SUS heat-resistant stainless
steel, and mesh-belt tensioning device adapted a lateral lead screw
adjust system for high performance.
- BHB series are designed for special products soldering, considering
the products dimension, volume, weight, thermo capacity. Reinforced
conveyor with adequate weight load capacity and clearance height
for passing through zones.
- UPS safety device ensures all PCB discharged from the furnace
automatically upon any power disconnection, failure or pause causing
PCB to remain inside of the furnace. |
|
